哥哥送我一个密码锁,可说明书都是英文.帮忙翻译一下吧!

哥哥送我一个密码锁,可说明书都是英文.帮忙翻译一下吧!
To set your personal combination,please obey the following steps.
the lock is preset at factory to open at 0-0-0.check the 0-0-0
aim at the indication line. press down the snap .now the lock is ready to open.
press down the button with sharp tool ,hold the position until next step 3 in finished.
turn the character wheels to set your personal combination
release the button, now your private combination is set.
remember well your new combination.if you want to change it again ,please repeat.
谢谢啦!
fishloveriver 1年前 已收到3个回答 举报

chpqchpq 幼苗

共回答了17个问题采纳率:94.1% 举报

大意是:
如果想设置私人密码,请按如下步骤操作
原场密码是0-0-0,请将0-0-0对准指示线,按下按钮,此时锁匠打开
用尖的东西一直按下按钮(这个按钮应该在你锁上的一个小孔里),同时转动齿轮到你想要的数字(即要设定的密码),之后松开按钮,你的私人密码设定成功!
请记住新密码,如果想改变密码,请重复刚才的操作.

1年前

1

lnbalife 幼苗

共回答了16个问题 举报

初始密000

1年前

1

蔓恋晴人 幼苗

共回答了20个问题采纳率:85% 举报

要设定你的个人的密码组合, 请按照下列的步骤.
锁在工厂被预先设定为 0-0-0. 打开瞄准指示线检查 0-0-0. 按下去。现在锁可以打开. 使用锐利的工具按下按钮按, 直到以下第3 个步完成
转轮子设定你的个人密码组合,设定好之后松开钮扣, 现在你的私人密码组合已被设定. 记好你的新密码. 如果你想要再改变密码 , 请重复以上步骤....

1年前

1
可能相似的问题
Copyright © 2024 YULUCN.COM - 雨露学习互助 - 19 q. 0.104 s. - webmaster@yulucn.com